HT70X User manual
Version 1.0.9.4
BASIC OPERATIONS
Understanding HT70X Interactive Voice Prompt Response Menu
The HT70X has a built-in voice prompt menu for simple device configuration which lists actions, commands,
menu choices, and descriptions. The IVR menu work with any phone connected to the HT70X . Pick up the
handset and dial “***” to use the IVR menu.
Table 6: Voice Prompt Menu
Press “*” for the next menu option
Press “#” to return to the main menu
Enter 01-05, 07,10, 13-17,47 or 99 menu options
“DHCP Mode”,
“Static IP Mode”
Press “9” to toggle the selection
If using “Static IP Mode”, configure the IP address
information using menus 02 to 05.
If using “Dynamic IP Mode”, all IP address information
comes from the DHCP server automatically after
reboot.
“IP Address “ + IP
address
The current WAN IP address is announced
If using “Static IP Mode”, enter 12 digit new IP
address. You need to reboot the HT70X for the new
IP address to take Effect.
“DNS Server “ + IP
address
Press “9” to move to the next selection in the list:
• PCM U / PCM A
• iLBC
• G-726
• G-723
• G-729
Announces the Mac address of the unit.