HT812 LEDs Pattern
There are four (4) LED types that help you manage the status of your HandyTone 812.
Table 4: HT812 LEDs Pattern Description
The Power LED lights up when the HT812 is powered on and it flashes
when the HT812 is booting up
The WAN LED lights up when the HT812 is connected to your network
through the WAN port.
The LAN LED lights up when the HT812 is connected to your network
through the LAN port.
The phone LEDs indicate status of the respective FXS port-phone on the
back panel
OFF - Unregistered
ON (Solid Blue) - Registered and Available
Blinking every 500 ms - Off-Hook / Busy
Slow blinking - FXS LEDs indicate voicemail
Figure 5: HT812 LEDs Pattern