Voice Mail
VM Notification
The HT812 indicates new voice mail messages using Phone LEDs and Stutter Tone.
The Phone LEDs on HT812 will start blinking slowly when a new voice mail message is available on
corresponding account.
A stutter tone will be played at first few seconds followed by dial tone when picking up the handset.
Note: New VM messages can be also indicated by LED blink, screen display, etc… if they are supported
on connected analog phones.
Accessing VM
To retrieve the new voice mail messages received, please refer to following steps:
1. Pick up the handset of the connected phone (stutter tone will be played).
2. Press *** (press the star key three times) to access the IVR menu and wait until you hear “Enter
the menu option “.
3. Press 86 and enter your configured password (if exist) to access your voice mail menu.
To Next Page
Loading...
Need help?
General
