Reset from Web Interface (Reset Type)
1. Access your HT812 UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings > Reset Type
5. Press Reset button (after selecting the reset type).
Full Reset: This will make a full reset
ISP Data: This will reset only the basic settings, like IP mode, PPPoE and Web port
VOIP Data: This will reset only the data related with a service provider like SIP server, sip user ID,
provisioning and others.
Note:
- Factory Reset will be disabled if the “Lock keypad update” is set to “Yes”.
- If the HT812 was previously locked by your local service provider, pressing the RESET button will
only restart the unit. The device will not return to factory default settings.
To Next Page
Loading...
Need help?
General
