HT818 Administration Guide
Version 1.0.27.2
Trusted Certificate
A,B,C,D
Uses the certificate for Authentication if “Check Domain Certificates” is set to “Yes”
under “Account” → “SIP Settings”.
This feature allows user to specify which CA certificate to trust when performing
server authentication. Default is Built-in trusted certificates.
Specifies SSL certificate used for SIP over TLS is in X.509 format. The HT818 has
built-in private key and SSL certificate.
Maximum length is 4096.
Specifies TLS private key used for SIP over TLS is in X.509 format.
Maximum length is 4096.
SIP TLS Private Key
Password
Specifies SSL Private key password used for SIP Transport in TLS/TCP.
Custom Certificate
(Private Key +
Certificate)
Allows users to update to the device their own certificate signed by custom CA
certificate to manage client authentication.
Sets the phone adapter system to enable the “CPE WAN Management Protocol”
(TR-069). Default setting is Yes.
Specifies URL of TR-069 Auto Configuration Servers (e.g.,
http://acs.mycompany.com), or IP address.
Default is: https://acs.gdms.cloud
Enters username to authenticate to ACS.
Enters password to authenticate to ACS.
Sends periodic inform packets to ACS. Default is Yes.
Sets frequency that the inform packets will be sent out to ACS.
Default setting is 86400 seconds.
Connection Request
Username
Enters username for ACS to connect to the HT818.
Connection Request
Password
Enters password for ACS to connect to the HT818.
This feature allows user to configure the TR-069 connection request port. Default
is 7547.
Configures the Cert File for the phone adapter to connect to the ACS via SSL.
To Next Page
Loading...
Need help?
General
