Grandstream Networks HT818 Administration Guide

P a g e | 37
HT818 Administration Guide
Version 1.0.27.2
CPE SSL Private Key
Specifies the Cert Key for the phone adapter to connect to the ACS via SSL.
Enable SNMP
Enables / disables the SNMP function. Default is No
SNMP Version
Choose between (Version 1, Version 2c, or Version 3).
SNMP Port
Listening Port of SNMP daemon (Default 161).
SNMP Trap IP Address
IP address of trap destination.
Up to 3 trap destinations are supported. Users should enter the IP addresses
separated with comma (,).
Port of Trap port
Port of Trap destination (Default 162)
SNMP Trap Version
Choose between (Version 1, Version 2c, or Version 3).
SNMP Trap Interval
Time interval between traps (Default is 5).
SNMPv1/v2c
Community
Name of SNMPv1/v2c community.
SNMPv1/v2c Trap
Community
Name of SNMPv1/v2c trap community.
SNMPv3 User Name
User name for SNMPv3.
SNMPv3 Security Level
• noAuthUser: Users with security level noAuthnoPriv and context name as
noAuth.
• authUser: Users with security level authNoPriv and context name as auth.
• privUser : Users with security level authPriv and context name as priv.
SNMPv3 Authentication
Protocol
Select the Authentication Protocol: “None” or “MD5” or “SHA.”
SNMPv3 Privacy
Protocol
Select the Privacy Protocol: “None” or “AES/AES128” or “DES”.
SNMPv3 Authentication
Key
Enter the Authentication Key.
SNMPv3 Privacy Key
Enter the Privacy Key.
SNMPv3 Trap User
Name
User name for SNMPv3 Trap.
SNMPv3 Trap Security
• noAuthUser: Users with security level noAuthnoPriv and context name as

Grandstream Networks HT818 Specifications

General

Brand	Grandstream Networks
Model	HT818
Category	Telephone Accessories
Language	English