Grandstream Networks UCM6100 Series Configuring

Firmware Version 1.4.1.4 Configuring UCM6100 Series with GXW410X Page 1 of 18
Index
Table of Contents
OVERVIEW ................................................................................................ 2
Connect UCM6100 to GXW410X Using Peer SIP Trunk .......................... 3
Create IVR on UCM6100 ....................................................................................................................... 3
Create Peer SIP Trunk on UCM6100 .................................................................................................... 4
Configure Outbound Rule on UCM6100 ................................................................................................ 4
Configure Inbound Rule on UCM6100 ................................................................................................... 5
Configure FXO Port on GXW410X ........................................................................................................ 6
Configure Unconditional Call Forward on GXW410X ............................................................................ 8
How to Dial ............................................................................................................................................. 9
Table of Figures
Figure 1: Method 2 - Create IVR 7200 on the UCM6100 ............................................................................. 3
Figure 2: Method 2 - Create Peer SIP Trunk on the UCM6100 .................................................................... 4
Figure 3: Method 2 - Configure Outbound Rule on the UCM6100 ............................................................... 5
Figure 4: Method 2 - Configure Inbound Rule on the UCM6100 .................................................................. 6
Figure 5: Method 2 – Configure FXO Port on GXW410X: Registration ........................................................ 6
Figure 6: Method 2 - Configure FXO Port on the GXW410X: DTMF Method ............................................... 7
Figure 7: Method 2 - Configure FXO Port on the GXW410X: DTMF Payload Type ..................................... 7
Figure 8: Method 2 - Configure FXO Port on the GXW410X: FXO Termination ........................................... 7
Figure 9: Method 2 - Configure FXO Port on the GXW410X: Call Progress Tones ..................................... 8
Figure 10: Method 2 - Configure FXO Port on the GXW410X: FXO Termination ......................................... 8
Figure 11: Method 2 - Configure FXO Port on the GXW410X: Channel Dialing .......................................... 8
Figure 12: Method 2 - GXW410X: Call Forwarding ...................................................................................... 9
This document is subject to change without notice. The latest electronic version of this document is
available for download here:
http://www.grandstream.com/support
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for
any purpose without the express written permission of Grandstream Networks, Inc. is not permitted.

Grandstream Networks UCM6100 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6100 Series
Category	PBX
Language	English