3-24
Settings and Measurement
External Filter...................... This parameter sets whether or not to use an external filter.
Off: An external filter is not used.
On: An external filter can be used.
Burn Out ............................. This parameter enables or disables the function that moves to full
scale to inform of a sensor burnout in a thermocouple.
Off: The burnout function is disabled.
On: The burnout function is enabled.
Note: We recommend that On be normally used.
Date/Time ........................... This parameter sets the date and time. When this setting is selected, a
submenu appears for setting the date and time.
Language............................ This parameter sets the GL400's display language.
Japanese: The display is in Japanese.
English US:The display is in English.
English UK:The display is in English.
Return to default settings.... This parameter returns all the settings to the factory defaults.
Are you sure ?
[ENTER]Yes/[QUIT]No
To Next Page
Loading...