3-28
Settings and Measurement
• Max: The maximum value of the data between the cursors is
displayed.
• Min: The minimum value of the data between the cursors is
displayed.
• Peak: The peak value of the data between the cursors is displayed.
• RMS: The effective value of the data between the cursors is
displayed.
R.M.S = ΣD
2
/n
D: data N: number of data
Channel specification: Specifies the two channels "A" and "B" for
calculation. Press EXECUTE to display the
between-cursor calculation results.
Save to Card (Between Cursors)
.................................. The specified replay data between the cursors can be saved to a
specified file format.
File Type: Specifies the file format for saving data.
• GBD: Binary format
• CSV: Excel format
Name Type: There are two methods: Auto or User.
Folder: The currently selected folder is displayed. Settings cannot
be made here.
File name: A new folder and a new file are created here.
CHECKPOINT
Data can only be saved if it has been captured to a PC card. Data in the internal memory will be erased
when the power is turned off.
To Next Page
Loading...