GRAPHTEC GL820 - Accessory;Option Specifications; Control Software; Accessorie; Battery Pack B-517 (Option)

4−7
CHAPTER 4 Specifications
4.3 Accessory/Option Specifications
Control Software
Item Description
Compatible operating system Windows XP/Vista/7
Functions Main unit control, realtime data capture, data conversion
Allowed connection up to 10
Number of channels per con-
nection
200 ch maximun
Maximum number of channels 500 ch maximun
Settings AMP settings, data settings, trigger/alarm settings, report settings, others
Captured data Realtime data (CSV, Binary)
Internal memory data (CSV, Binary)
USB memory data (CSV, Binary)
Display Analog waveforms, logic waveforms, pulse waveforms, digital values
Display modes Y-T View, Digital View, Report View, X-Y View between Cursors (only during
replay)
File conversion Between cursors, All data, Thinning function
Monitor functions Alarm monitor enables sending of email to the specified address
Statistic/History Displays maximum, minimum and average values during measurement
Report function Enables creation of daily or monthly files
Accessorie
Item Description
Quick Start Guide GL820-UM-8xx
CD-ROM GL820-CDM0xM (User Manual, Application software)
AC adapter 100 to 240 VAC, 50/60 Hz, Power supply cord for each area
Battery Pack B-517 (Option)
Item Description
Capacity 7.4 V/2200 mAh 17Wh
Battery type Lithium secondary battery
Running time Up to two packs can be mounted
<When LCD is ON>
Battery pack x 1 (brightness MAX): approx. 2.5 hours
Battery pack x 1 (brightness MIN): approx. 3 hours
Battery pack x 2 (brightness MAX): approx. 5 hours
Battery pack x 2 (brightness MIN): approx. 6 hours
<When LCD is OFF>
Battery pack x 1: approx. 3.5 hours
Battery pack x 2: approx. 7 hours
Note:When capturing to internal memory at 1 s, sampling, 20 channel termi-
nals, using new battery packs at +25°C environment.
Note: The running time depends on the operating environment.
Charging method Mount in the main unit
Time required for charging Battery pack x 1: approx. 4 hours
Battery pack x 2: approx. 8 hours
Switchover in the case of a
power failure
Because the battery is used together with the AC adapter, the power supply
will be switched automatically to the battery in the event of a power failure.
Note: The AC adapter is the primary power source.
Operation environment Running on battery: 0 to 40°C, Battery being charged: 15 to 35°C
Other functions • When the battery is running low, le is closed automatically.
(when captured to internal memory or USB memory)
• remaining amount indicator