GRAPHTEC GL820 - WEB Server Function

3−52
CHAPTER 3 Settings and Measurement
3.5 WEB Server Function
This function allows operating and monitoring GL820 via a Web browser.
•SupportedWebbrowsers
 •MicrosoftInternetExplorer6.0orlater
 •Netscape6.2orlater
 •Firefox1.5orlater
 •Opera9.0orlater
•AvailablefunctionsusingaWebbrowser
 •OperatingGL820
 •MonitoringGL820displayscreen
 •EnlargingGL820displayscreen
 •LinkingtoFTP
 •LinkingtoourWebsite
•SettingtheURL
The URL (Uniform Resource Locator) must be correctly set according to your network environment.
Follow the procedure below to access the GL820.
http://IP address/Index.html
•http ................... Protocol to access the server.
HTTP (Hyper Text Transfer Protoc
•IPaddress ........ Type in the IP address of the GL820 to monitor.
•Index.html ......... File name. This is fixed to Index.html.
The port number can be omitted. If you enter a port number, specify 80.
http://(IP-address):80/index.html
•Procedure
1. Open the Web browser.
2. Type in the URL (http://IP address/Index.html) in the address input field.