3−15
CHAPTER 3 Settings and Measurement
(2) Capturing
During data capture, data is captured into the Internal memory or USB device.
You cannot use the MENU key to change the setting.
Operations available during capture
SPAN/TRACE/POSITION The SPAN/TRACE/POSITION key is used to change settings.
Display mode The DISPLAY key is used to change the display mode.
Dual View replay The REVIEW key is used to replay captured data in two windows
at the same time.
Save to device While data is replayed in two windows, the FILE key is used to
save data to a device.
Setting check The MENU key is used to change the settings.
Time axis change The TIME/DIV key is used to change the time axis.
(3) Dual View Replaying
You can replay data during capture.
Waveform on the right side is the current captured data and the left side is previously captureddata. You
can use the Direction keys (
) to move the cursor to captured data to check digital values.
Operations available during dual view replaying
Moving cursor The CURSOR key is used to switch between cursors A and B.
The
or keys are used to move the cursors.
Save to device The FILE menu is used to save data to a device.(During capture, data up
to the present or data between cursors can be saved to a separate file.
While capture to the internal memory is in progress, use this feature to
save data to USB memory without stopping capture.)
Screen copy The FILE menu is used to copy the screen.
Time of Capturing
Capture time
Note: “+++++:++:++” is displayed when the capture time is long.
Capture file name
Screen buffer usage rate (orange line)
Displays the voltage at a point indicated by
Cursor A or B or the selected cursor.
Displays the measurement time at a point
indicated by Cursor A or B or the selected cursor.
To Next Page
Loading...
