GRAPHTEC GL820 - Replaying

3−16
CHAPTER 3 Settings and Measurement
(4) Replaying
Displays the captured data.
Operations available during replaying
SPAN/TRACE/POSITION The SPAN/TRACE/POSITION key is used to change settings.
Menu operations during data replay The MENU key is used to move the cursor, search data and set
calculation.
Moving cursors The CURSOR key is used to switch between cursors A and B.
The
or keys are used to move the cursors
File operations The FILE key is used to save the data between the cursors.
Time axis change The TIME/DIV key is used to change the time axis.
Displays the voltage at a point indicated by
Cursor A or B or the selected cursor.
Displays the measurement time at a point
indicated by Cursor A or B or the selected cursor.