GRAPHTEC GL820 - To Mount

2−17
CHAPTER 2 Checks and Preparation
To Mount
Insert the tabs at the top of the terminal unit into the slots of the GL820, and push in the unit until the lock
tabs at the bottom of the unit are securely locked.
(1) Insert tabs at the top of the terminal unit into the slots.
(2) Press the unit in the direction shown until it is securely locked.
Lock Tabs
 • IftheterminalunitthatcomeswiththestandardGL800ismountedontheGL820,thetemperature
measurement accuracy may not meet the specifications.
• If the terminal unit that comes with the standard GL820 is mounted on the GL800, the temperature
measurement accuracy may not meet the specifications.