GRAPHTEC GL820 - Quit(Local); Direction Keys; Enter

3−8
CHAPTER 3 Settings and Measurement
(5) QUIT (LOCAL)
This key is primarily used for the following operations.
•Tocancelasettingduringmenuconguration.
•ToreturntotheMONITORwindowwhentheSPAN/TRACE/POSITIONwindowisdisplayed.
•Tocancelremotestatus(inwhichkeysaredisabled)throughinterfacecontrol.
•Toclosethemenuscreen.
•Toquitdatareplay.
(6) Direction keys
This key is primarily used for the following operations.
•Tomoveamenuorsettingitemduringmenuconguration.
•Tomovethecursorduringreplay.
•TomovetheactivechannelintheWaveform+DigitalandDigital+CalculationDisplay
screens (
keys).
•TochangethesettingofSPAN/TRACE/POSITION( keys).
•TochangetheQuicksetting( keys).
•TochangethechanneltobedisplayedintheDigital+CalculationDisplayscreen( keys).
(7) ENTER
This key is primarily used for the following operations.
•Tonalizesettingitemsduringmenucongurationoropensubmenus.