EasyManua.ls Logo

GRAPHTEC GL820 - Checking the Outer Casing; Checking the Accessories

GRAPHTEC GL820
109 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2−2
CHAPTER 2 Checks and Preparation
2.1 Checking the Outer Casing
After unpacking, check the GL820's outer casing before use. In particular, please check for the following:
Surface scratches
Other flaws such as stains or dirt
2.2 Checking the Accessories
After unpacking, check that the following standard accessories are included.
Standard Accessories
Item Remarks Quantity
Quick Start Guide GL820-UM-85x 1
CD-ROM User's Manual, Application software 1
AC cable/AC adapter 100 to 240 VAC, 50/60 Hz 1
Optional Accessories
Item Option number Remarks
Logic alarm cable B-513 2m, Bare tips
DC drive cable B-514 2m, Bare tips
Battery pack B-517 7.4V/2200mAh 17Wh
Humidity sensor *1 B-530 3 m, with dedicated power connector
midi LOGGER carrying case *2 B-536
Extension terminal base set B-537 Extension terminal base unit, cable
20 channel extension terminal set B-538 20 channel terminals, extension terminal base unit, con-
nection plate, screws
DIN rail jig for GL820 main unit *3 B-539 Built to order
DIN rail jig for GL820 extension
terminal *3
B-540 Built to order
Humidity sensor power box B-542 For connection with 10 humidity sensors: Built to order
M3 screws with flat washers (60) B-543 60 per set
USB memory 2GB B-550 2GB
Shunt resistor 250
B-551
250
, Rated power of 1 W, Maximum service voltage of
15.8 V, Built to order
T-type thermocouple *2 JSB-7115-5M-T 5-m length, 5 thermocouples per set, wire diameter of
0.32, 1.0 x 1.6 x 5000 mm
K-type thermocouple *2 JSB-7115-5M-K 5-m length, 5 thermocouples per set, wire diameter of
0.32, 1.0 x 1.6 x 5000 mm
Extra fine K-type the rmocouple
(TC200/TD1000), 5 per set
ST-55K-TC-1.2M Tip wire diameter of 0.127, 0.5 x 0.7 x 200 mm, Relay
part 1 m, 5 per set
Needle-shape K-type thermo-
couple
RIC-410 -100 to 300°C, Class 1, Cord length: 1.1 m
Stationery-surface K-type thermo-
couple
RIC-420 -30 to 400°C, Class 2, Cord length: 1.1 m
L-type stationery-surface K-type
thermocouple
RIC-430 -30 to 600°C, Class 2, Cord length: 1.1 m
Mini-connector for K-type thermo-
couple (5 per set)
RIC-440 5 per set, Connectable thermocouple: Wire diameter of
0.65 mm, End terminal: M3Y terminal
Mini-connector for K-type thermo-
couple (2 per set)
RIC-441 2 per set, Connectable thermocouple: Wire diameter of
0.65 mm, End terminal: M3Y terminal
Mini-connector for T-type thermo-
couple (5 per set)
RIC-450 5 per set, Connectable thermocouple: Wire diameter of
0.65 mm, Terminal: M3Y terminal
Mini-connector for T-type thermo-
couple (2 per set)
RIC-451 2 per set, Connectable thermocouple: Wire diameter of
0.65 mm, End terminal: M3Y terminal
*1: Allowable temperature range: -25 to +80°C
*2: Sold only in Japan.
*3: Can be used also for the GL800 and GL900.

Table of Contents

Other manuals for GRAPHTEC GL820

Related product manuals