GRAPHTEC GL820 - Connecting to a PC; Connection Using a USB Cable

2−11
CHAPTER 2 Checks and Preparation
2.8 Connecting to a PC
Use the USB, LAN Interface to connect the GL820 to a PC
Connection Using a USB Cable
Use the USB cable to connect the GL820 to a PC.
USB cable
If the USB cable is used, the USB driver must be installed in your PC. Please refer to “USB Driver
Installation Manual” in the accessory CD-ROM for the installation procedure.
The USB connector is adjacent to the LAN connector. Make sure the cable is inserted into the correct
connector.
● Use the A-B USB cable to connect the GL820 to a PC.
A-connector B-connector