GRAPHTEC GL820 - About Registered Trademarks

II
Introduction
(7) Insofar as possible, position the GL820 input signal cables away from any other cables which are likely to be
affected by electromagnetic interference.
(8) For stabilized measurement, allow the GL820 to warm up for at least 30 minutes after turning it on.
About Registered Trademarks
• MicrosoftandWindowsareregisteredtrademarksortrademarksofMicrosoftCorporationintheU.S.and
elsewhere.
• Othercompanynamesandproductnamesincludedinthismanualareregisteredtrademarksortrademarksof
their respective companies.