Settings and Measurement
3-21
Name Type ......................... Set how the file is named.
• Auto: Automatically uses the capture start time as the file name.
Example: 20050101-123456_UG.GBD
• Number part: Created on January 1, 2005, 12: 34:56.
• UG part: Number of user capturing data
UG: Guest
U1: User 1
U2: User 2
(For details on user setting, see “USER settings” on page 3-25.)
• User: Captures data using a user-defined name.
File Format.......................... Set the file format in which data is saved.
• GBD: Binary format
• CSV: EXCEL format (such data cannot be replayed with the GL800)
Statistical calculation .......... Two types of operation can be performed on all channels.
Operation results are displayed on the Digital + Calculation Display
screen.
• Off: Calculation is not performed.
• Average: Displays the simple average value during data capture.
• Max: Displays the maximum value during data capture.
• Min: Displays the minimum value during data capture.
• Peak: Displays the peak value data during data capture.
• RMS: Displays the effective value of the data during data capture.
D: data n: number of data
TRIG settings
This menu is used to specify trigger conditions and alarms.
R.M.S = ΣD
2
/n
Setting Selections available
Start side Off, Level, Alarm, External Input, Date
source setting Level : Mode, Level, Combination
Alarm : Alarm port number
External input : none
Date : Date, Time
Stop side Off, Level, Alarm, External Input, Date, Time
source setting Level : Mode, Level, Combination
Alarm : Alarm port number
External input : none
Date : Date, Time
Time : Duration
Repeated capturing On, Off
Alarm level settings Mode, Level, Output
Alarm Hold On, Off
Send burnout alarm On, Off
To Next Page
Loading...
