Recommended accessories
Pcs Description No.
1 Receiver GR-12L HOTT S1012
1
LiPo 4/2200 14,8V 9722.4
1 ACRO Klaus M 1:5 75 mm 43120.75
1 MX-12 33112
Required tools and adhesives
Scalpel cutter 982
cyanoacrylate adhesive thick 5821
Activator 953.150
Geometry triangle/goniometer
Fork wrench 3.5
Fork wrench 10
Allen key 1.5 mm
Allen key 2 mm
Allen key 2.5 mm
Meaning of the symbols
Comply with order!
This symbol specifies the order in which the parts must be assembled in the construction phase.
Centre of gravity!
This symbol shows the centre of gravity position, possible help with measurements and arrows.
Adhesives note!
This symbol indicates that cyanoacrylate adhesive thick No. 5821 to use and possible assistance with
measurements or arrows. Observe hazard warnings on the package.
Wingspan 1400 mm
Length 1350 mm
Total height 370 mm
Weight 1760 g
Maximum operating voltage 16,8 V
Maximal battery dimensions 35 x 35 x 110 mm
Suggested battery capacity 2200 mAh
Servo operating voltage 4,8 - 6 V DC
Minimum receiver channels 5
Speed controller 40 A
Technical specifications
To Next Page
Loading...
Need help?
General