18
Operating notices
Operating notices
Converting joysticks
Neutralization
Both the left and the right joystick can be confi gured
for neutralized or non-neutralized operation as desired.
Open the transmitter housing as previously described.
To change the joystick's factory setting, locate the screw
shown in the fi gure below enclosed in a white circle.
Notice:
The aggregate for the right joystick is a mirror image of
the left joystick so the corresponding screw for the right
joystick is on the right side just below the middle.
Now turn this screw down until the respective joystick
is free to move from limit to limit - or turn the screw out
until the joystick again completely self-restoring.
To Next Page
Loading...
