223
Detail program description - Control adjust
TX VOLT:
MODEL TIME:
BATTERIETIME:
TIMER(GE:)CENTER:
TIMER(GE.)TOP:
TIME:
RECEIVER
After selection of the desired menu line with the arrow
keys of the left or right touch pad …
1
3
8
SENSOR
VOICE TRIGGER
REPEAT 5SEC
TRIG
TRANSFER
RECEIVER
VARIO
… and then pressing the central SET key of the right
touch pad, the selected submenu opens:
TEMP:
STRENGHT:
RX VOLT:
LOWVOLT:
Here, after selection of the desired line with the arrow
keys of the left or right touch pad and then
pressing the central SET key of the right touch pad,
activate ( ) or deactivate ( ) the selected voice
trigger.
SENSOR
This line only appears if a sensor was fi rst activated in
the "SENSOR SELECT" submenu:
1
3
SENSOR
8
VOICE TRIGGER
REPEAT 5SEC
TRIG
TRANSFER
RECEIVER
VARIO
If, for example, the "VARIO" sensor was selected, after
selection of the "SENSOR" line and then pressing the
central SET key of the right touch pad, the following
display appears:
ALTITUDE:
MAXALT:
MINALT:
VOLT MINIMUM:
As described in the left column, you can also activate
( ) or deactivate ( ) the voice trigger of the desired
line after pressing the central SET key of the right touch
pad.
Notice:
The selection made here is completely independent of
the "VARIO" voice triggers.
To Next Page
Loading...
