259
Detail program description - Control adjust
Elevat curve
BRAKE SETTINGS
AILE
Crow
D.red
+30%
+33%
0%
0%
0%
0%
WK WK2
Normal
… and enter how wide the ailerons should be raised in
the "Crow" line.
With "D.red" (differentiation reduction), you should enter
the value previously set in the aileron differentiation line
in order to suppress it again while breaking.
In the "Elevat curve" submenu, enter a correction value
for the elevator, see page 162.
Notice:
The "Brake settings" submenu of the "Wing mixers"
menu is switched "off" if "yes" is entered for the current
fl ight phase in the "Model type" menu, page 82 "Motor
at C1 front/rear" and in the "Motor" column of the
"Phase setting" menu, page 128. Change the fl ight
phase, if applicable.
To Next Page
Loading...
