GRAVOGRAPH IS900 - Stages of Unpacking

IS900 IQ
+
Machine - Electronic Engraving machine .8 First Contact
Stagesofunpacking
Unpackingshouldonlybedonebyatleastfourpeopleorusingaliftingdevicewhichcan
takeuptoatleast200kg.
Beforeopeningthecardboardbox,checkthatitistherightwayup.
After opening the box:
1. Takeoutthemanual.
2. Takeouttheboxofaccessoriesandtakeofftheprotectivepackaging.
3. Putthelifting strapsinto the liftingdevice (pict. ).Then, following thedevice securityrules
advisedlifttheIS900IQ+machineandplaceitontotheworkstation
4. Takeofftheliftingstrapsfromthe liftingdevice .
Make sure that no components are missing from the packaging. If any part has been
forgottenpleasegetintouchwithyourGRAVOGRAPHdealer.
Keep all the packaging materials so that you can move your machine in total safety. This packing was conceived to
guarantee the protection of the machine during its transport (for a return in repair for example).
This packaging is in conformity with European recycling standards.