Gree FLEXX Series Installation Manual

A-Coil
10
(b)
(c) (d)
When the coil matches furnace, temperature of air flow which come from outlet of
furnace must be required a maximum of 200
℉
. Recommended configuring is as shown
below.
(a) Standard Application: Right hand shown / Left hand similar (not shown)
(b) Counter flow: Left hand shown / Right hand similar (not shown)
(c) Downward flow
(d) Upward flow

Gree FLEXX Series Specifications

General

Type	Heat Pump
Series	FLEXX
SEER	Up to 20
HSPF	Up to 10
Refrigerant	R410A
Heating Operation Range	-22°F to 75°F
Cooling Operation Range	5°F to 122°F
Operating Temperature Range (Heating)	-22°F to 75°F
Operating Temperature Range (Cooling)	5°F to 122°F
Energy Efficiency Ratio (EER)	Up to 12.5
Dimensions (Outdoor Unit)	Varies by model
Weight (Outdoor Unit)	Varies by model
Compressor Type	Inverter
Power Supply	208/230V, 1Ph, 60Hz
Noise Level	As low as 55 dB(A)