19
DC Inverter Multi
VRF Service Manual
DPOUSPM
4.1.3 Installation
1 3 42
Fig.4.1.3
SN1 234
Name Casing base, installed into the wall Controller Soleplate Screw M4X25 Controller Panel
Notice for installation under the guidance of Fig.4.1.3
Cut off power supply before install the electrical components, it is forbidden to carry out the installation
with power on;
Get one end of the 4 core communication cable, put it through the rectangular hole on the base board
on the wire remote controller;
+ROGWKHEDVHERDUGRIFRQWUROOHURQWKHZDOOWKHQ¿[LWWRWKHZDOOZLWK0[VFUHZ
3OXJWKHFRUHFRPPXQLFDWLRQFDEOHLQWRWKHVORWRQWKHZLUHGUHPRWHFRQWUROOHUWKHQ¿[WKHFRQWUROOHU
panel with base board together;
4.2 Wired Controller XK02
4.2.1 Operation View
F
AUTO
SET
HOUR
TURBO
SHIELD
MEMORY MASTER SAVE
E-HEATER
BLOW QUIET
AUTO
CO
2
Enter/cancel Fan Mode
FunctionT imer On/Off
Fig.4.2.1.1