22
DC Inverter Multi
VRF Service Manual
DPOUSPM
4.2.2 Dimension
92
60
35
92
24
46
11
24
Fig.4.2.2
4.2.3 Installation of Wired Controller
1 3 4 52
Fig.4.2.3
No. 1 2 3 4 5
Name
Socket housing
installed in wall
Base plate of controller Screw M4X25 Control Panel Screw ST2.2X6.5
Notice for installation under the guidance of Fig.4.2.3
Cut off power supply before install the electrical components, it is forbidden to carry out the installation
with power on;
Get one end of the 4 core communication cable, put it through the rectangular hole on the base board
on the wire remote controller;
+ROGWKHEDVHERDUGRIFRQWUROOHURQWKHZDOOWKHQ¿[LWWRWKHZDOOZLWK0[VFUHZ
3OXJWKHFRUHFRPPXQLFDWLRQFDEOHLQWRWKHVORWRQWKHZLUHGUHPRWHFRQWUROOHUWKHQ¿[WKHFRQWUROOHU
panel with base board together;