Battery
Replacement
Replacement of batteries:
1: Remove the battery cover plate from the rear of the
remote controller.
2: Take off the used batteries
3: Insert two new AAA1.5V batteries and pay attention
to the polarity.
4: Reinstall the battery cover plate.
Please notice:
When replacing the batteries, do not use used or differ-
ent types of batteries, otherwise it may cause malfunc-
tion.
If the remote controller will not be used for a long time,
please remove batteries to avoid leaking.
Make sure that used batteries are disposed of according
to local regulations. Most often batteries are not allowed
to be part of domestic waste.
If the remote controller does not operate correctly,
please take the batteries out and reinsert them after at
least 30 seconds. If the malfunction is still valid, replace
the batteries.
To Next Page
Loading...
Need help?
General
