Installation
Important Notes
The installation of the system is only permitted by trained personnel
strictly following the local country rules and regarding the guidelines of
this manual. Please refer to a local authorised service centre before instal-
lation. The same applies when removing an existing and installed system
to another place.
Delivery conditions of Indoor and Outdoor Unit
The system components are delivered in a pre-installed condition. With delivery,
the two main components (indoor– and outdoor-unit) are pressurised and con-
tain the complete HC R-290 refrigerant charge amount of the functional AC sys-
tem. For installation, besides mounting the indoor and the outdoor unit, it is only
necessary to make the connection between the two units with the already in-
stalled and pressurised refrigerant transfer pipes and electrical connection ca-
bling.
The HC R-290 AC delivery package consist of the following components:
The Indoor Unit with attachments, mounting support, remote controller and
documentation
The Outdoor Unit
All components
are pressurised
and precharged
with HC R-290
refrigerant!
To Next Page
Loading...
