Wired Controller XK46
48
Fig.4.14 Save Setting for Cooling in Fahrenheit
Start up Save function for Heating: When the unit is off, simultaneously press
“TIMER” and “ ” buttons for 5s, the buzzer will give out a sound and then unit will
enter into Save setting mode. ” icon is blinking. “MAX” icon and Mode icon are
on. Press “MODE” button to switch to Heating or 3D Heating or Space Heating
mode. Press “ ” or “ ” button to adjust the temperature limit for Save function.
Press “ENTER/CANCEL” button to start up Save function.
After starting up save function, it will display “ ” icon for all modes under on
and off status.
Cancel save function:
When the unit is off, press “TIMER” and “ ” buttons for 5s to enter into save
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
To Next Page
Loading...
