Wired Controller XK46
49
setting, press “ENTER/CANCEL” button to cancel Save function of all modes.
Setting method two:
Save Setting for Cooling: When unit is on and under Cooling or Dry mode,
press FUNCTION button to select Save function. “ ” icon will blink and MIN icon
lit up. Press “ ” or “ ” button to adjust to the minimum temperature. Press
ENTER/CANCEL button to activate this function.
Fig.4.15 or 4.16 Shows how to set Save function for Cooling:
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
To Next Page
Loading...
