Grill'D Aurora - Page 61

61
Door Window
Note: carry out the installation after installing the decorative screen. The firebox door can be
mounted in such ways that it will open either to the right, or to the left.
Procedure:
1) Select the door mounting side and, depending on this, insert the upper part of the metal
pin into the upper mounting hole of the door.
Note: insert the pin at an angle.
2) Slide the pin up to let install the bottom of pin into the lower mounting hole of the door.
3) Insert the top of pin into the upper mounting hole of the heating flue.
Note: mount the door with the pin to the seat at an angle.
4) Slide the door bottom to the place of installation, put the initially installed locking plates
under the door (Figure 7), and insert the pin into the mounting holes of the door and the
heating flue by sliding it home.
2
4
1
3
2
4
1
3
Figure 7