To Next PageTo Next PageWhy doesn't the blade track correctly on my Grizzly G0640X?
If the blade does not track consistently, correctly, or at all on your Grizzly Saw, it could be because the wheels are not coplanar or aligned with each other. Adjust wheels to be coplanar/aligned with each other. Another cause could be worn out rubber tires on wheels. Redress or replace the rubber tires on the wheels.
Provides an overview of the bandsaw and the manufacturer's commitment to customer satisfaction.
Lists Grizzly Industrial's contact details for manual feedback and service inquiries.
Explains the basic principles and capabilities of the bandsaw in performing various cuts.
Details the materials and components used in the bandsaw's construction.
Provides specific measurements and specifications related to the bandsaw's table.
Lists additional technical details including country of origin, warranty, and setup time.
Covers general safety warnings, protective gear, and operational precautions for using machinery.
Offers specific safety guidelines and warnings tailored for bandsaw operation and handling.
Discusses the importance of having the correct power supply circuit available for the machine.
Explains the amperage drawn by the machine and its relation to circuit sizing.
Details the specific electrical circuit requirements for operating the bandsaw on 220V.
Provides essential information on correctly grounding the machine to prevent electric shock.
Offers guidelines and recommendations for using extension cords with the bandsaw.
Lists all the necessary tools and components required for assembling the bandsaw.
Guides the user through the process of unpacking the machine and checking for damage.
Provides a detailed list of main components and fasteners shipped with the bandsaw.
Explains how to remove the rust preventative coating from the machine's surfaces.
Discusses important factors for choosing a suitable placement location and ensuring floor load capacity.
Offers instructions and safety warnings for safely moving and positioning the heavy bandsaw.
Recommends mounting the machine securely to the floor or a mobile base for stability.
Provides step-by-step instructions for assembling various parts of the bandsaw.
Details the procedure for aligning the bandsaw blade on the wheels for optimal performance.
Outlines the steps for performing a test run to ensure the machine operates correctly after assembly.
Explains how to properly tension the bandsaw blade for accurate cutting and blade longevity.
Guides the user on adjusting the blade guide bearings for proper side-to-side support.
Describes how to adjust the support bearings located behind the blade for correct cutting support.
Details how to set the positive stop to ensure the table returns accurately to 90 degrees.
Explains how to align the table so the miter slot is parallel to the bandsaw blade for accurate cuts.
Provides instructions for aligning the fence parallel to the miter slot for accurate ripping.
Covers the calibration of the miter gauge to ensure accurate angle cuts.
Explains the function of the guide post and how to adjust the upper blade guide assembly.
Describes the quick-release lever for adjusting blade tension and its proper use.
Details how to tilt the bandsaw table to achieve various cutting angles.
Defines key terms and characteristics related to bandsaw blades.
Offers guidance on choosing the appropriate blade width and type for different cutting tasks.
Explains different bandsaw blade tooth styles and their applications.
Describes common tooth set patterns (alternate, wavy, raker) and their uses.
Explains the concept of tooth pitch (TPI) and its effect on cutting speed and smoothness.
Identifies common causes of bandsaw blade breakage and how to avoid them.
Provides instructions for cleaning blades and breaking in new blades to ensure longevity.
Guides the user through the safe and correct procedure for removing and replacing bandsaw blades.
Explains how to adjust the variable blade speed and change speed ranges for different materials.
Details how to inspect wood workpieces for safety hazards before cutting.
Offers essential tips for achieving accurate and safe wood cuts using the bandsaw.
Explains the process of ripping wood along the grain and how to perform the cut.
Describes how to perform a 90° crosscut across the grain of wood.
Covers the process of resawing lumber into thinner boards and blade selection for this task.
Guides on cutting multiple workpieces simultaneously by stacking them.
Provides techniques for cutting smooth curves and handling abrupt turns.
Explains how to cut circles using a jig with the bandsaw.
Details how to inspect metal workpieces for safety hazards before cutting.
Offers essential tips for achieving accurate and safe metal cuts using the bandsaw.
Guides on selecting the correct blade TPI and speed for various metal cutting applications.
Provides a chart for evaluating metal cutting performance based on chip appearance.
Lists available replacement bandsaw blades with specifications for wood and metal cutting.
Recommends specific shop vacuum models for dust collection with the bandsaw.
Lists various types of safety glasses and face shields for eye protection during operation.
Recommends mobile bases for stability and respirators for dust protection.
Suggests products for protecting unpainted cast iron and steel parts on the machine.
Details procedures for cleaning the bandsaw, including wheel tires and general surfaces.
Explains the function and adjustment of the wheel brush for sweeping away sawdust.
Guides on lubricating key components like tables, fence, and trunnions.
Provides instructions for cleaning and greasing the guide post gears.
Details the maintenance and lubrication of blade and belt tension leadscrews.
Explains how to clean and lubricate the table trunnions for smooth tilting action.
Describes how to redress worn rubber tires on the wheels to improve blade tracking.
Guides the user through the process of replacing the bandsaw's V-belts.
Provides instructions for adjusting the wheel brush to ensure proper contact with the wheel.
Details how to check and adjust wheel alignment for optimal bandsaw performance.
Explains how to shim the table to ensure it is 90° to the blade for accurate stacked cuts.
Discusses blade lead and provides methods to correct it by adjusting fence or table.
Details how to adjust the tension lever's engagement screw for proper blade tension release.
Covers critical safety precautions and hazards related to working with electrical wiring.
Presents the electrical wiring diagram for the bandsaw's components and connections.
Introduces the main assembly and provides an overview of its components.
Lists all parts associated with the main assembly of the bandsaw, with reference numbers.
Illustrates the fence and blade guide assemblies with component diagrams.
Lists all parts related to the fence and blade guide assemblies with reference numbers.
Shows the location and identification of various warning and instructional labels on the bandsaw.
General| Blade Diameter | 10 inches |
|---|---|
| Table Size | 27 inches x 40 inches |
| Max Cutting Depth at 90° | 3-1/8 inches |
| Max Cutting Height at 45° | 2-1/4 inches |
| Dust Port Size | 4 inches |
