Grizzly G0699 - Identification

Model G0699 (Mfd. Since 5/15)
-3-
Identification
Figure 1. Model G0699 identification.
Crosscut
Fence
Flip
Stops
Crosscut
Table
Swing
Arm
Main Blade
ON/OFF Button
Scoring Blade
ON/OFF Button
Sliding
Table
Rip
Fence
Blade Elevation
Handwheel
Workpiece
Hold-down
Blade Guard
w/Dust Port
Extension
Wing
Extension
Wing
End
Shoe
Blade Tilt
Handwheel
& Scale
STOP Button
For Your Own Safety Read Instruction
Manual Before Operating Saw
a) Wear eye protection.
b) Use saw-blade guard and riving knife for
every operation for which it can be used,
including all through sawing.
c) Keep hands out of the line of saw blade.
d) Use a push-stick when required.
e) Pay particular attention to instructions
on reducing risk of kickback.
f) Do not perform any operation freehand.
g) Never reach around or over saw blade.