Grizzly G0768 - Page 76

-70-
Model G0768/G0769 (Mfd. Since 8/15)
order online at www.grizzly.com or call 1-800-523-4777
T10253—2" Mini Self-Centering Vise with
Swivel Base
Ideal for holding small parts and model making.
Has self-centering jaws and adjustable gib on a
dovetailed way. 2
1
⁄16" jaw opening, 2" jaw width,
2
5
⁄8" crank handle, and base swivels 360°. Overall
size is 6
3
⁄4" L x 4" W x 3
3
⁄8" H with handle removed.
H6195—3" Rotary Table w/ Clamps
For horizontal or vertical use. 3" diameter table
rotates 360°. Low profile—only 1.670" tall. 4
5
⁄16"
T-slots. 1:36 ratio or 10° per handwheel revolution.
Scale reads to 15 minutes. Has brass lock knob.
Table height in horizontal position: 1
5
⁄8";
in vertical position: 3
1
⁄4".
Figure 125. T10253 2" Mini Self-Centering Vise. Figure 127. H6195 3" Rotary Table w/Clamps.
MT#2 End Mill Holders
Hold your end mills in the Model G0769 spindle
with these quality end mill holders. Sized for vari-
ous end mill shanks.
Model MT Drawbar Size
T25703 #2
3
⁄8"-16 TPI
3
⁄16"
T25704 #2
3
⁄8"-16 TPI
3
⁄8"
T25705 #2
3
⁄8"-16 TPI
1
⁄2"
T25706 #2
3
⁄8"-16 TPI
5
⁄8"
Figure 128. MT#2 end mill holders.
Model
Cutting
Dia.
Flute Lgth OA Lgth
H3649
1
⁄16"
3
⁄16" 1
1
⁄2"
H3650
3
⁄32"
3
⁄8" 1
1
⁄2"
H3651
1
⁄8"
1
⁄2" 1
1
⁄2"
H3652
5
⁄32"
9
⁄16" 2"
H3653
3
⁄16"
5
⁄8" 2"
H3654
7
⁄32"
5
⁄8" 2
1
⁄2"
H3655
1
⁄4"
3
⁄4" 2
1
⁄2"
H3656
9
⁄32"
3
⁄4" 2
1
⁄2"
H3657
5
⁄16"
13
⁄16" 2
1
⁄2"
H3658
3
⁄8"
7
⁄8" 2
1
⁄2"
H3659
7
⁄16" 1" 2
3
⁄4"
H3660
1
⁄2" 1" 3"
Figure 126. 4-flute C-2 grade carbide end mills.
4-Flute C-2 Grade Carbide End Mills
These American-made 4-flute Carbide End Mills
feature standard cutting lengths and nominal
minus diameter tolerances. Recommended for
profiling and finishing non-ferrous materials.