Grizzly G0925 User Manual

Model G0925 (Mfd. Since 02/20)
-5-
The information contained herein is deemed accurate as of 2/11/2020 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 1 OF 2
Model G0925
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0925 8" BENCHTOP DRILL PRESS
Product Dimensions:
Weight................................................................................................................................................................ 34 lbs.
Width (side-to-side) x Depth (front-to-back) x Height................................................................. 9 x 17-1/2 x 23-1/2 in.
Footprint (Length x Width)................................................................................................................. 11-1/2 x 7-1/2 in.
Shipping Dimensions:
Type..................................................................................................................................................... Cardboard Box
Content........................................................................................................................................................... Machine
Weight................................................................................................................................................................ 36 lbs.
Length x Width x Height....................................................................................................................... 20 x 14 x 11 in.
Electrical:
Power Requirement........................................................................................................... 120V, Single-Phase, 60 Hz
Full-Load Current Rating....................................................................................................................................... 2.3A
Minimum Circuit Size.............................................................................................................................................. 15A
Connection Type....................................................................................................................................... Cord & Plug
Power Cord Included.............................................................................................................................................. Yes
Power Cord Length................................................................................................................................................. 6 ft.
Power Cord Gauge......................................................................................................................................... 18 AWG
Plug Included.......................................................................................................................................................... Yes
Included Plug Type................................................................................................................................................ 5-15
Switch Type.................................................................................................. Paddle Safety Switch w/Removable Key
Motors:
Main
Horsepower............................................................................................................................................. 1/3 HP
Phase............................................................................................................................................ Single-Phase
Amps........................................................................................................................................................... 2.3A
Speed................................................................................................................................................ 1700 RPM
Type........................................................................................................................................... TEFC Induction
Power Transfer ............................................................................................................................................ Belt
Bearings..................................................................................................... Shielded & Permanently Lubricated
Main Specifications:
Operation Information
Type......................................................................................................................................................... Bench
Swing........................................................................................................................................................... 8 in.
Spindle Taper........................................................................................................................................... JT#33
Spindle Travel.............................................................................................................................................. 2 in.
Max. Distance From Spindle to Column................................................................................................ 4-1/8 in.
Max. Distance From Spindle to Table................................................................................................... 7-1/2 in.
Number of Spindle Speeds............................................................................................................................... 5
Range of Spindle Speeds......................................................................................................... 740 - 3140 RPM
Drilling Capacity (Mild Steel)..................................................................................................................... 1/2 in.
Drilling Capacity (Cast Iron)...................................................................................................................... 1/2 in.
Drill Chuck Type....................................................................................................................... JT33 Key Chuck
Drill Chuck Size.............................................................................................................................. 1/16 - 1/2 in.
Machine Data Sheet

Grizzly G0925 Specifications

General

Brand	Grizzly
Model	G0925
Category	Power Tool
Language	English