Model G0925 (Mfd. Since 02/20)
-23-
SECTION 5: ACCESSORIES
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
order online at www.grizzly.com or call 1-800-523-4777
G5978—Drill Press Vise 6"
If you use a drill press and value your fingers, you
need one of these. Made from high-grade cast
iron, these hefty horizontal vises offer support
and stability, allowing you to keep your hands well
away from fast moving bits and cutters.
Figure 27. Model G5978 Drill Press Vise 6".
D2139—Steelex
®
Cobalt Alloy Drill Bits 21-Pc.
Set
Because of its resistance to heat and stress,
Cobalt Alloy bits turn faster without overheating.
The 135° split point enables the drill to use less
thrust and eliminates the tendency of the drill
point to walk, which makes these great for use in
portable drills or drill presses. Cobalt Alloy bits will
retain their edge sharpness longer than normal
HSS bits, resulting in a significant saving of time
and money in the workshop. Includes
1
⁄16"-
3
⁄8" bits
and a heavy-gauge steel index case for storage.
Figure 26. Model D2139 21-Pc. Alloy Drill Bits.
H8203—Professional Drill Bit Sharpening
Machine (For Bits
1
⁄8"–
1
⁄2" in Diameter)
This precision made Drill Bit Sharpening Machine
is so simple to use, anyone can sharpen dull,
smaller bits in three easy steps. Just set the drill
bit in the collet, grind the taper relief angle, then
grind the web thinning angle to reduce the center
point width. It features a depth adjustment gauge,
tapered diamond wheel, 90°–140° angle setting
adjustment, and built-in collet tray. Collet sizes
include
1
⁄8",
5
⁄32",
3
⁄16",
1
⁄4",
9
⁄32",
5
⁄16",
3
⁄8",
25
⁄64",
7
⁄16",
15
⁄32", and
1
⁄2". Patented in the US!
Figure 28. Model H8203 Professional Drill Bit
Sharpening Machine.
To Next Page
Loading...
Need help?
General
