Grizzly G0925 User Manual

-24-
Model G0925 (Mfd. Since 02/20)
G2500—20-Pc. Regular Sanding Drum Set
Use on your drill press, lathe, or hand drill. This kit
consists of 5 drums in popular
1
⁄2" x
1
⁄2",
3
⁄4" x 1",
1" x 1", 1
1
⁄2" x 1
1
⁄2", and 2" x 1
1
⁄2" sizes. Comes with
3 grits for each drum.
Figure 31. Model G2500 20-Pc. Sanding Drum
Set.
Figure 32. Model G8581
1
⁄2" Keyless Drill Chuck,
JT33.
G8581—
1
⁄2" Keyless Drill Chuck, JT33
Industrial-grade keyless chucks are excellent for
quick bit changes. Knurled grips and exceptional
accuracy make these chucks an indispensible
part of any shop. Use on drill presses, lathe tail-
stocks and millling machines. 0-
1
⁄2" capacity with
a Jacobs Taper #33 in back.
H7789—Mortising Attachment
A mortising attachment and chisel lets you drill
square holes in wood. The attachment holds the
sharp cornered chisel in place while the inner drill
cuts out the center. Drills have
1
⁄2" shank.
Figure 29. Model H7789 Mortising Attachment.
H8196—3-Pc. Step Drill Set
These step drills are designed to incremen-
tally drill through sheet metal and thin stock until
reaching the desired hole size. Three step drills
cover hole sizes from
1
⁄8" to
1
⁄2" in
1
⁄32" increments,
3
⁄16" to
1
⁄2" in
1
⁄16" increments, and
1
⁄4" to
3
⁄4" in
1
⁄16" increments. No-slip shanks fit
3
⁄8" chucks.
Titanium nitride coated for long life.
Figure 30. Model H8196 3-Pc. Step Drill Set.

Grizzly G0925 Specifications

General

Brand	Grizzly
Model	G0925
Category	Power Tool
Language	English