Grizzly G7944 - Page 2

-2-
Model G0794 (Mfd. Since 05/18)
The information contained herein is deemed accurate as of 3/26/2019 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 1 OF 2
Model G0794
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0794 FLOOR DRILL PRESS WITH LASER AND DRO
Product Dimensions:
Weight.............................................................................................................................................................. 146 lbs.
Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 14 x 24 x 64 in.
Footprint (Length x Width)............................................................................................................................ 18 x 11 in.
Shipping Dimensions:
Type..................................................................................................................................................... Cardboard Box
Content........................................................................................................................................................... Machine
Weight.............................................................................................................................................................. 156 lbs.
Length x Width x Height....................................................................................................................... 56 x 20 x 11 in.
Must Ship Upright.................................................................................................................................................... No
Electrical:
Power Requirement........................................................................................................... 110V, Single-Phase, 60 Hz
Full-Load Current Rating.......................................................................................................................................... 9A
Minimum Circuit Size.............................................................................................................................................. 15A
Connection Type....................................................................................................................................... Cord & Plug
Power Cord Included.............................................................................................................................................. Yes
Power Cord Length.......................................................................................................................................... 8-1/2 ft.
Power Cord Gauge......................................................................................................................................... 18 AWG
Plug Included.......................................................................................................................................................... Yes
Included Plug Type................................................................................................................................................ 5-15
Switch Type.................................................................................................. Paddle Safety Switch w/Removable Key
Motors:
Main
Horsepower............................................................................................................................................. 3/4 HP
Phase............................................................................................................................................ Single-Phase
Amps.............................................................................................................................................................. 9A
Speed................................................................................................................................................ 1720 RPM
Type................................................................................................................. TEFC Capacitor-Start Induction
Power Transfer ............................................................................................................................... V-Belt Drive
Bearings..................................................................................................... Shielded & Permanently Lubricated
Main Specifications:
Operation Information
Type........................................................................................................................................................... Floor
Swing......................................................................................................................................................... 14 in.
Spindle Taper............................................................................................................................................ MT#2
Spindle Travel........................................................................................................................................ 3-1/4 in.
Max. Distance From Spindle to Column...................................................................................................... 7 in.
Max. Distance From Spindle to Table................................................................................................. 31-1/2 in.
Number of Spindle Speeds............................................................................................................................. 12
Range of Spindle Speeds........................................................................................................ 140 – 3050 RPM
Max. Head Swivel................................................................................................................................. 360 deg.
Drilling Capacity (Mild Steel)..................................................................................................................... 3/4 in.
Drill Chuck Type....................................................................................................................... JT33 Key Chuck
Drill Chuck Size............................................................................................................................. 3/64 – 5/8 in.