Model G7943/G7944 (Mfd. Since 09/17)
-33-
order online at www.grizzly.com or call 1-800-523-4777
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
SECTION 5: ACCESSORIES
G2500—20-Pc. Regular Sanding Drum Set
Use on your drill press, lathe, or hand drill. This kit
consists of 5 drums in popular
1
⁄2" x
1
⁄2",
3
⁄4" x 1",
1"x 1", 1
1
⁄2" x 1
1
⁄2", and 2" x 1
1
⁄2" sizes. Comes with
50, 80 and 120 grit sizes for each drum.
Figure 36. Model G2500 20-Pc. Sanding Drum
Set.
G5753—Drill Press Vise 6"
If you use a drill press and value your fingers, you
need one of these. Made from high-grade cast
iron, these hefty horizontal vises offer support
and stability, allowing you to keep your hands well
away from fast moving bits and cutters.
Figure 37. Model G5753 Drill Press Vise 6".
Figure 38. Recommended products for protect-
ing unpainted cast-iron/steel areas.
G5562—SLIPIT
®
1 Qt. Gel
G5563—SLIPIT
®
12 Oz. Spray
G2871—Boeshield
®
T-9 12 Oz. Spray
G2870—Boeshield
®
T-9 4 Oz. Spray
H3788—G96
®
Gun Treatment 12 Oz. Spray
H3789—G96
®
Gun Treatment 4.5 Oz. Spray
To Next Page
