25 26
ShineSEM-X (with electric meter)
Rated input voltage/range
(three specifications)
Rated input frequency/range
Input current and CT parameters
Maximum detection current
(CT primary side current)
Input current
(CT secondary side current)
Current Detection Accuracy
(CT)
Maximum number of inverter
connections
Maximum communication
distance
RS485 standard twisted pair shielded wire: 1000m
Ethernet cable: 100m
Dimensions
(height*width*thickness)
Range of working temperature
1. The total power of inverters or loads in the entire
system cannot exceed the corresponding system
capacity of the ShineSEM-X.
System capacity
Technical Parameters
The model introduction of the ShineSEM-X takes ShineSEM-X-RH as an example:
ShineSEM-X-RH
①
②
③
ShineSEM- X: Wisdom Subarray Communication Box
R: anti-reflux box
C: communication box
L: 400V
M: 480/540V
H: 800V
Intelligent sub-array communication box, configuration barcode introduction:
PLC: with PLC communication function
SPF: with ring network communication function
LTE: with 4G communication function
EXT: With extended version, add 4 channels of 485
channels
3P4: The electric meter connection line adopts the three-
wire four-phase system
3p3: The connection line of the electric meter adopts the
three-wire three-phase system
2P3: The electric meter connection line adopts the split-
phase connection method
1P2: The electric meter connection line adopts single-
phase connection method
250/5A、600/5A、1200/5A、2000/5A、4000/5A、
6000/5A
Power (the current anti-
reflux system supports a
maximum capacity of
100KW)
100KW、300KW、600KW、1MW、2MW、3MW
4.2 Model description
To Next Page
Loading...
Need help?
General
