Growatt SPH Series Installation Manual

Chart 5.1
E. Battery installation option is not far away from the position of SPH, the length between SPH and battery
should not be more than 1.5m.
F. The ambient temperature should be -25℃~60℃.
G. SPH can be installed in vertical or lean back on plane, please refer to the below:
Chart 5.2
H. Installation position shall not prevent access to the disconnection means.
I. In order to ensure machine can run normally and easy to operate, please pay attention to
provide adequate space for SPH, please refer to below:

Growatt SPH Series Specifications

General

Type	Hybrid Inverter
Max. Input Voltage	600V
Number of MPPTs	2
Protection Rating	IP65
Output Power Range	3kW - 10kW
Rated AC Output Power	3-10 kW
Communication Interfaces	RS485, USB, Wi-Fi
Output Voltage	230 V
Frequency	50/60 Hz
Operating Temperature	-25°C to 60°C
Cooling Method	Natural Convection