Growatt SPH Series Installation Manual

Chart 2.1
As shown above, a complete grid-connected system of SPH TL BL-UP consists of PV modules, SPH TL BL-UP
inverter, battery, utility grid and other components.
Attention:
As the system refer to battery use, we must make sure ventilation of the service environment and temperature
control in order to prevent the danger of battery explosion, battery recommended installation environment
must be strictly in accordance with the specification, if the specification is IP20 environment, the pollution
degree of the unit is PD2, meanwhile the temperature should be control in the 0-40℃ of indoor ventilation
and the humidity should be 5%-85%. If the chosen PV modules needs to positive or negative ground connection,
please contact with Growatt for technical support before installation.
2.2 Safety Measure

Growatt SPH Series Specifications

General

Type	Hybrid Inverter
Max. Input Voltage	600V
Number of MPPTs	2
Protection Rating	IP65
Output Power Range	3kW - 10kW
Rated AC Output Power	3-10 kW
Communication Interfaces	RS485, USB, Wi-Fi
Output Voltage	230 V
Frequency	50/60 Hz
Operating Temperature	-25°C to 60°C
Cooling Method	Natural Convection