EasyManuals Logo

Grundfos CIU 501 User Manual

Grundfos CIU 501
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
Address Register name Description
00213 MinFrequency
Minimum pump frequency in % of nominal frequency. The scale is 0.01 %.
Only available on MAGNA3 and MGE model H and later.
00214 MaxFrequency
Maximum pump frequency in % of nominal frequency. The scale is 0.01 %.
Only available on MAGNA3 and MGE model H and later.
00215 SetpointRangeMin
Minimum value of setpoint range in % of sensor maximum value. The scale is 0.01 %.
Only available on MAGNA3 and MGE model H and later.
00216 SetpointRangeMax
Maximum value of setpoint range in % of sensor maximum value. The scale is 0.01 %.
Only available on MAGNA3 and MGE model H and later.
00217 RESERVED -
00218 RESERVED -
00219 RESERVED -
00220 RESERVED -
00221 FlowEstimationState
State of the flow estimation algoritm
0: Flow estimation within range
1: Flow estimation below range
2: Flow estimation above range
00222 Kp
Actual proportional gain. The scale is 0.1.
Only available on MAGNA3 and MGE model H and later.
00223 Ti
Actual integral action time. The scale is 0.1 s.
Only available on MAGNA3 and MGE model H and later.
00224 DirectControl
Actual selection between Direct/Inverse control.
0: Inverse control
1: Direct control
Only available on MAGNA3 and MGE model H and later.
Related information
9.2 CIM configuration register block
17. Grundfos alarm and warning codes
24
English (GB)

Table of Contents

Other manuals for Grundfos CIU 501

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grundfos CIU 501 and is the answer not in the manual?

Grundfos CIU 501 Specifications

General IconGeneral
BrandGrundfos
ModelCIU 501
CategoryController
LanguageEnglish

Related product manuals