English (GB)
4
English (GB) Installation and operating instructions
Original installation and operating instructions.
CONTENTS
Page
1. Symbols used in this document
2. Applications
The Grundfos CIU unit (CIU = Communication
Interface Unit) is used as a communication interface
between a Grundfos product and a main network.
The CIU unit is used together with a CIM module
(CIM = Communication Interface Module) fitted in the
CIU unit.
GENIbus is used for internal communication
between the CIU unit and a Grundfos product.
2.1 Nameplate
Fig. 1 Example of nameplate
2.2 Explanation to symbols
1. Symbols used in this document
4
2. Applications
4
2.1 Nameplate
4
2.2 Explanation to symbols
4
3. Installation kit
5
4. Installation
5
4.1 Wall mounting
5
4.2 Mounting in control cabinet
5
4.3 Electrical connection
6
5. Technical data
7
6. Cleaning
7
7. Disposal
7
Warning
Prior to installation, read these installation
and operating instructions. Installation and
operation must comply with local
regulations and accepted codes of good
practice.
Read the installation and operating
instructions for the relevant CIM module.
Warning
If these safety instructions are not
observed, it may result in personal injury!
If these safety instructions are not
observed, it may result in malfunction or
damage to the equipment!
Notes or instructions that make the job
easier and ensure safe operation.
TM04 1723 1008
Pos. Description
1 Type designation
2 Product number
3 Supply voltage
4 Version number
5 Production code (year and week)
6, 7, 8, 9 Approvals and CE-marking
10 Environmental type
11 Serial number
12 Enclosure class
Symbol Designation Description
LED1
Red/green status LED for
main network
LED2
Status LED for internal
communication between
the CIM module and the
Grundfos product
Protective earth terminal
Earth terminal
Type
CIU 150
123 4 5
96753081
11W
24-240 VDC/AC 0-60Hz
01 0840
1203
54
V-No. P.c.
Serial No.
IP
Product No.
U
N
P
MAX
Made in Thailand
COMMUNICATION
INTERFACE UNIT
96177821
30XP
68 1112107 9
!