Grundfos TP Service Instructions

English (GB)
2
English (GB) Service instructions
CONTENTS
Page
1. Symbols used in this document
1. Symbols used in this document
2
2. Identification
3
2.1 Nameplate
3
2.2 Type key
3
3. Handling
5
4. Torques and lubricants
6
5. Service tools
7
5.1 Special tools
7
5.2 Standard tools
8
5.3 Torque tools
8
6. Dismantling and assembly
9
6.1 General Information
9
6.2 Dismantling
9
6.3 Replacing the wear rings
9
6.4 Assembly
9
7. Replacing the valve flap of TPD pumps
9
8. Exploded view
10
Warning
If these safety instructions are not observed,
it may result in personal injury.

Grundfos TP Specifications

General

Motor Efficiency	IE3
Series	TP
Connection Type	Flanged
Protection Class	IP55
Installation	In-line
Material	Stainless Steel
Maximum Operating Pressure	16 bar
Flange Standard	EN 1092
Pump Housing Material	Stainless Steel
Impeller Material	Stainless Steel
Temperature Range	-25 °C to +120 °C
Liquid Temperature Range	-25 °C to +120 °C