Reset Protocol
Selecting the RESET arrow key in the Reset Protocol menu
(Display 39) will return the selected protocol settings to their original
factory settings. Press the NEXT key to exit.
NOTE: This does not affect the instrument settings or the settings of
any other protocol.
Save Protocol
Once all of the settings have been selected for the protocol, these
settings can be saved by selecting the SAVE keys (Display 0).
Press the NEXT key to exit.
NOTE: If a protocol has been modified, a * will appear in the
protocol name. For example, if protocol TE 1.5-4.0 has been
modified, it will appear on the Corti as TE*1.5-4.0.
To Next Page
Loading...
Need help?
General
