9. Maintenance
PNEG-750-G2 16" Series II Sweep 131' and 135' Diameter 67
I. Type of Lubrication
The type and quantity of lubrication required for each type and size of reducer is listed in
the following Chart.
Lubrication - Gearboxes Quantity and Type of Lubricant per Box Size
NOTE: Lubricant capacities are approximate, fill until lubricant starts coming out oil level plug hole.
Hub City (Tractors Driver) Reducer
Box Series
Volume
Pints Worm Top
520 10.6
Lubrication Specification
Mobile SHC634-Synthetic
Or Equal
EPT Browning (Screw Drive)
Box Size Volume (Quarts)
107-09 2 Approximately
115-09 2.56 Approximately
203-09 4 Approximately
207-09 6.3 Approximately
215-09 9 Approximately
Lubrication Specification
Mineral Oil Temp 15°F-60°F Temp 50°F-125°F
AGMA 4 AGMA 5
Mobile Oil Company DTE Oil Extra Heavy DTE-Oil BB
Synthetic Oil Temp 0°F-90°F Temp 15°F-125°F
AGMA 4 AGMA 5
Mobile Oil Company Mobile SHC 629 Mobile SHC 630