GTE COBOSAFE CBSF - Technical Data Accessories; Requirements for Measurement Setup; Requirements for Temperature and Humidity Measurement

45
CoboSafe-CBSF 325-2810-012US15
TECHNICAL DATA
16.3 Technical Data Accessories
Specification Value Unit
Nominal voltage, primary side
100 … 230
V (AC)
Nominal voltage, secondary side 5 V
Charging current
0,7 … 1,2
A
16.4 Requirements for Measurement Setup
Mechanical requirements contact surface:
Specification Value Unit
Stiffness measuring points > 2000 N/mm
Contact surface 80 x 80 mm
Requirements bearing surface
The stated values represent recommendations of the manufacturer.
16.5 Requirements for Temperature and Humidity Measurement
Temperature measurement:
Specification Value Unit
Measurement inaccuracy ±5 °C
Humidity measurement:
Specification Value Unit
Measurement inaccuracy ±3 % RH