EasyManua.ls Logo

Guardian CORE SERIES - Connecting the Door Opener Arms; Attaching Door Arms to Opener and Door

Guardian CORE SERIES
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.adhguardianusa.com
Attaching Door Arms
To prevent SERIOUS INJURY:
- DO NOT connect power until instructed.
- Keep hands and ngers away from the sprocket during operation.
- Wear gloves when installing chain/belt and cable.
- Keep hands and ngers away from joints and possible sharp edges.
To Connect Door Arm
1. Fasten the Straight Door Arm to the Trolley with a 5/16” - 1” Clevis Pin and lock it with a Hitch Pin.
2. Fasten the Curved Door Arm to the Door Bracket with 5/16” - 1” Clevis Pin and lock it with a Hitch Pin.
3. To connect the door arms together, choose two pairs of holes which are as far apart as possible. Fasten the arms using
two 5/16” - 18 x 1” Bolts and Flange Nuts.
WARNING
Ceiling
Rail of Opener
<1-3/4”
>1-3/4”
Flange Nuts
Hitch Pin
Clevis Pin 5/16” - 1”
Bolt 5/16” - 18x1”
Hitch Pin
Clevis Pin 5/16” - 1”
Door Panel
Ceiling
Rail of Opener
Door Panel

Related product manuals